Is mold in your attic?

Is mold in your attic?

Attic mold in Toronto and the Greater Toronto Area is extremely common.

Whenever anyone calls us and says they have a mold issue they would like me to come check out, in the back of my mind I am always thinking attic mold.  In fact, sometimes I will guess, “Where is the mold located, in the attic?”  And overwhelmingly, I am right.  Usually when it comes to mold, people think dark, dank and musty so crawlspaces and basements usually come to mind.  However, here Southern Ontario, I find my company doing three attic jobs for one of every other type of job combined right now!  If you have ever been in an attic (especially in the summer) dank and musty don’t really come to mind.  But the theme still persists.  So the question is: Why?  The answer might surprise you.

Energy Efficiency…a Blessing and a Curse

The Federal government of Canada made the decision in the early 1970’s that homes in Canada should have increased energy efficiency, which I agree with.  In order to do this (among other things) they decided to require increased insulation in the attic, (and continue to increase attic insulation requirements to an R60 at the time of this post),

The Need for adequate Ventilation

While I am always for increased energy efficiency, it must be done responsibly.  Unfortunately, the way the code was written addressed the insulation, but failed to take into account the need for corresponding increased ventilation.  Let me explain this as this is a good lesson for any homeowner, (

Because of this increase, homes built up to the late 1970’s are at risk for mold in attics more than their 1980 and newer counterparts, and certainly more so than the energy ‘sieves’ that are homes pre 1980.  So whenever I ask someone if their home was built before 1980 and the answer is ‘no,’ my next question is, when did you replace the roof?  Between those two scenarios, I am almost (as in over 95%) right because when people replace their roof, it is a perfect time to add insulation to bring the home up to current code and save those energy dollars.  The other edge to that sword however, is the same one the government created, which is not being attentive to the ventilation necessary to move the air enough to prevent mold growth.  So the lesson?  If you add insulation, make sure you talk with your roofer about adding vents.  If they say you don’t need to, you should find a different roofer that knows better.

A failure to control moisture in new materials destined for new construction

Okay, back to attic mold growth.  Luckily, in the early 2000’s the building code deficiency was corrected, and homes are more or less well enough ventilated to prevent mold.  However, the last thing we will discuss in this post is building practices.  When any home is built, by code the building’s sub structure (2x4s, 2x6s, plywood, sub floor etc.) must be brought below 16% moisture content.  I wish that this happened in all cases, but sadly, the number of homes that we have re-mediated before anyone has ever looked into them is staggering.  The reason?  Almost always it is because the home was not brought into acceptable moisture levels before the drywall went up and insulation added.  If the materials are ‘wet’ (for the purposes of this discussion, beyond 16% moisture content) and insulation is added, that hom es fate is essentially sealed and will undoubtedly experience a mold issue.

One of our future post will deal with power vents and active ventilation systems. In the meantime, if you think you have a mold problem in your attic, do not hesitate to call us!

Maple Leaf Mold Inc. is a certified  mold / asbestos removal and biological disinfection / air analysis company located in Toronto that uses certified IICRC technicians for all testing and remediation projects.

We are a professionally licensed firm experienced in testing, verifying  and removing Mold / Asbestos / Lead and other environmental contaminants as well as providing disinfection services to control and kill biological contaminants.

Call 416-254-7256 to talk with us about your issue anytime.



Posted in

Leave a Comment

You must be logged in to post a comment.

Contact Us Now!

We can inspect your home / business for mold / asbestos usually within 3 hours or less.