Black Mold and Covid-19

Black Mold and Covid-19

As reported by Pfizer Pharmaceuticals, the coronavirus has recently linked Black Mold and Covid-19… two serious fungal / mold infections have been found the Aspergillis species has been identified as one of the main culprits. COVID-19 associated pulmonary aspergillosis and COVID-19 associated mucormycosis have been detected in the field during testing. The resurgence of these rare mold / fungal infections has medical personnel concerned,

.https://wwwnc.cdc.gov/eid/article/27/5/20-4412_article

https://www.cdc.gov/fungal/covid-fungal.html

In 2021 a study in India found that there were more than 47,000 cases of aspergillosis reported in just under three months. And with the recent emergence of the Omicron variant spreading here in Ontario, reports suggest that the number of cases is likely much higher

Aspergillis, which is often, mistakenly, referred to as “black mold”, existed before COVID-19, though the diseases it causes were both rare and primarily affects people with severe illnesses—such as bone marrow transplants or acute myeloid leukemia—and people in the ICU with damage to the lungs. However, it has been exacerbated with COVID-19.  https://mapleleafmold.ca/connection-betwe…navirus-and-mold/

Mucor Mold

Common misconceptions

The term “black mold / fungus” has been used by the public to describe mucormycosis; however, according to Jay Aram, MD, Global Medical Affairs Lead, Anti Infectives at Pfizer, black mold / fungus is actually a different category of fungus that is not usually associated with aspergillosis or mucormycosis. Instead of black mold / fungus, the medical community prefers to use “mucor fungi.”

Another common misconception is that these diseases are contagious.

This is not true,” says Aram. “These infections develop due to exposure to the mold spores—primarily in the air. People do not produce these spores and cannot spread them to others.”

What are Aspergilliosis and Mucormycosis?

These disease are known as opportunistic secondary infections caused by mold / fungi in patients with severe COVID-19. According to Aram, these infections are considered opportunistic because they are more common in people with an impaired immune system or who have developed lung damage such as acute respiratory distress syndrome.

Both mold / fungal infections are considered rare, however, they can be fatal if left untreated. Of the two, reports indicate that these diseases are usually associated with more severe cases as well as a higher mortality rate. “If left untreated, mortality associated with aspergillosis, may be up to 80 percent,” says Aram. “In mucormycosis, mortality is nearly 100 percent if untreated.”

How does a person get infected with these diseases?

Fungi, especially the spores of aspergillosis, can be found everywhere in the environment: it can be found in soil, decomposing plant matter, plants, air, food, and water. According to Aram, aspergillosis, (which is found in household dust, building materials—in addition, to soil, plants, food, and water), is approximately10 times more prevalent than the mucor fungi associated with mucormycosis (which are found in the environment as well—such as in soil and decaying organic material.) “We live with them every day, and as immune-competent people, we usually do not have a problem with that,” he says.3

These spores can enter the body in several ways: by inhaling them, swallowing them in food or medicines, or by spores entering wounds and contaminating them. Inhalation is the most common way of coming into contact with these fungi that cause systemic infection.3

Healthy people can usually clear these spores from the body. It becomes a problem when either our immune systems are weakened, or there is damage to the natural human defenses in tissues or the lungs—for instance, with a COVID-19 infection—which can cause an infection to spread.

What are the risk factors?

Poorly controlled diabetes was reportedly the most common underlying risk factor in patients, where diabetes is more widespread and often left untreated. People with diabetes have high blood sugar. This, researchers believe, makes the body a more conducive environment for mold / fungi to grow.

Another risk factor is the use of corticosteroids, which are strong immunosuppressants used to treat severe cases of COVID-19. Corticosteroids have been known to impair the ability of phagocytes (cells that consume harmful bacteria in the body), therefore leaving a person more vulnerable to fungal infections.

The environment is also at play. Tropical climates, where it is hot and humid, are prime breeding grounds for fungi to grow. And with warmer temperatures forecast as a result of climate change, https://mapleleafmold.ca/climate-change-i…r-than-you-think/ Canadian populations are under adverse risk.  And evidence suggests that in India, these mucor fungi are more prevalent, making exposure more likely than in other areas of the world.

Treatment options

Early intervention is critical for both diseases. Health care teams and hospital staff are being urged to increase their awareness of these fungal infections. “The earlier you can screen the patient and spot the infection, the better,” says Aram. Screening can include a test that measures galactomannan, a molecule found in the cell wall of Aspergillus mold / fungi. A computed tomography (CT) scan is used to confirm a diagnosis. “Pending confirmation, doctors should treat a patient immediately.”

Research shows that combination medical therapy may be needed. This includes using antifungal medication in addition to controlling blood sugar and the immediate removal of any dead tissue. 

Future outlook

Due to the spread of the Delta and Omicron variants, countries could potentially see an increase in fungal infections—not only in India but in Canada as well. It is important for health care providers to have greater awareness and to be prepared, especially for high-risk patients. Quicker diagnoses, better treatment methods, and more research are needed to control these fungal infections.

 

Maple Leaf Mold Inc. is a certified  mold / asbestos removal and biological disinfection / air analysis company located in Toronto.

We are a professionally licensed firm experienced in testing, verifying  and removing mold / asbestos / Covid-19 as well as providing disinfection services to control and kill biological contaminants.

Call 416-254-7256 to talk with us about your issue anytime.

               

Leave a Comment





Contact Us Now!

We can inspect your home / business for mold / asbestos usually within 3 hours or less.